Characterization of syngas produced from MSW gasification at commercial-scale ENERGOS Plants

Characterization of the syngas produced in the gasification process has been performed at commercial-scale Energy-from-Waste plants under various conditions of lambda value and syngas temperature. The lambda value from the gasification process is here defined as the ratio of the gasification air to the total stoichiometric air for complete combustion of the fuel input. Evaluation of the syngas calorific value has been performed by three different methods, i.e., estimation of the syngas calorific value from continuous in-line process measurements by mass and energy conservation equations, measurement of the syngas composition based on gas chromatography and calculation of the Gross Calorific Value from the measured composition, and direct continuous measurement of the calorific value using based on gas calorimeter.     

Delineation of groundwater contamination around an ash pond: geochemical and GIS approach

The study has investigated the levels of metal contamination in groundwater due to particulate matter fallout and leaching from ash pond and assigned contamination indices for the adjacent localities around an ash disposal site with application of geographic information systems (GIS). Fe, Ba, Cu, Mn, S, Pb, V, and Zn were found to be the major contaminants in groundwater. Enrichment factors (EF) of these elements with respect to the United States Environmental Protection Agency (USEPA) maximum contaminant levels show high values for Mn, Fe, and Pb in groundwater. The zone of attenuation for Ba, Fe, Cu, Mn, S, and Zn in groundwater is about 600-900 m from the ash pond, while Pb did not show any significant attenuation even at a distance of 1200 m. Tube wells around Rankasingha and Kukurhanga villages are most contaminated whereas open wells of Lachhmanpur, Kaniapada, and Kurudul villages showed higher degrees of contamination.     

Improving marine water quality by mussel farming: a profitable solution for Swedish society

Eutrophication of coastal waters is a serious environmental problem with high costs for society globally. In eastern Skagerrak, reductions in eutrophication are planned through reduction of nitrogen inputs, but it is unclear how this can be achieved. One possible method is the cultivation of filter-feeding organisms, such as blue mussels, which remove nitrogen while generating seafood, fodder and agricultural fertilizer, thus recycling nutrients from sea to land. The expected effect of mussel farming on nitrogen cycling was modeled for the Gullmar Fjord on the Swedish west coast and it is shown that the net transport of nitrogen (sum of dissolved and particulate) at the fjord mouth was reduced by 20%. Existing commercial mussel farms already perform this service for free, but the benefits to society could be far greater. We suggest that rather than paying mussel farmers for their work that nutrient trading systems are introduced to improve coastal waters. In this context an alternative to nitrogen reduction in the sewage treatment plant in Lysekil community through mussel farming is presented. Accumulation of bio-toxins has been identified as the largest impediment to further expansion of commercial mussel farming in Sweden, but the problem seems to be manageable through new techniques and management strategies. On the basis of existing and potential regulations and payments, possible win-win solutions are suggested.     

Preliminary Studies on Converting Agricultural Waste into Biodegradable Plastics – Part III: Sawdust

Summary Hardwood sawdust was derivatized either by carboxymethylation, glutaration, maleiation, phthallation, or succination in order to produce anionic materials suitable for complexation with soy protein isolate. Blending each derivative with soy protein isolate resulted in instant precipitation of gels. Infrared spectroscopy and differential scanning calorimetry suggested that each derivative formed a complex with protein. Reaction products could be dried into pellets exhibiting tensile strengths between 0.9–2.4 MPa, suggested that these materials could be promising candidates for biodegradable structural materials.     

Multi-scale Atmospheric Dispersion Modelling by Use of Adaptive Gridding Techniques

An accurate prediction of the transport-reaction behaviour of atmospheric chemical species is required to fully understand the impact on the environment of pollution emissions. Elevated levels of secondary pollutants such as ozone in the lower atmosphere can be harmful to the health of both plants and animals, and can cause damage to property present in the urban environment. Detailed models of pollution mechanisms must therefore be developed through comparisons with field measurements to aid the selection of effective abatement policies. Such models must satisfy accuracy requirements both in terms of the number of species represented, and the spatial resolution of species profiles. Computational expense often compels current models to sacrifice detail in one of these areas. This paper attempts to address the latter point by presenting an atmospheric transport-reaction modelling strategy based upon a finite volume discretisation of the atmospheric dispersion equation. The source terms within this equation are provided by an appropriate reduced chemical scheme modelling the major species in the boundary layer. Reaction and transport discretisations are solved efficiently via a splitting technique applied at the level of the non-linear equations. The solution grid is generated using time dependant adaptive techniques, which provide a finer grid around regions of high spatial error in order to adequately resolve species concentration profiles. The techniques discussed are applied in two dimensions employing emissions from both point and area sources. Preliminary results show that the application of adaptive gridding techniques to atmospheric dynamics modelling can provide more accurately resolved species concentration profiles, accompanied by a reduced CPU time invested in solution. Such a model will provide the basis for high resolution studies of the multiple scale interactions between spatially inhomogeneous source patterns in urban and regional environments.     

Transient puffs of trace organic emissions from a batch-fed waste propellant incinerator

Emissions data have been obtained from a waste propellant incinerator. The incinerator is a dual fixed hearth, controlled air incinerator equipped with acid gas and particulate scrubbing. "Puffing" has been evident in this waste propellant incinerator by spikes in the CO concentration. Transient puffs of organics may travel down the combustion chambers and lead to stack emissions. The major conclusions from this study are that (1) transient puffs are formed due to the semi-batch feed nature of the combustion process (causing a local oxygen deficiency) and high water content of the desensitized propellant; (2) in batch-fed combustors, puffs can contribute to most of the organic emissions (which are relatively low) measured with US EPA sampling and analytical methods; (3) it is estimated that batch-fed combustion contributes up to 7-18 times more emissions than steady-state combustion will generate; (4) by applying dispersion analyses to determine the amount of oxygen deficiency in the flame zone, the combustion zone concentration of CO during batch-fed operation could be as high as 160,000 ppm, compared to a measured peak stack concentration of 1200 ppm CO; and (5) an organic sample is collected and averaged over at least a 2-h period that smooths out the transient peaks of organics emissions during batch-fed operation. For emissions that are associated with long-term potential health impacts, this is an appropriate sampling method. However, if a compound has a short-term potential health impact, it may be important to measure the time-resolved emissions of the compound.